The power amplifi er shall be a solid-state two-channel model. The amplifi er shall provide extensive protection and diagnostic capabilities, including output current limiting, DC protection, circuit breaker, and thermal protection. The front-panel controls shall be two black detented level controls (one for each channel) and a power switch. The rear-panel controls shall be a circuit breaker reset switch and a Dual/Bridge-Mono mode switch. Front-mounted indicators shall be the following: Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the channel’s input signal exceeds –40 dBu. Clip Indicators: Two red LEDs, one for each channel, illuminate when the channel’s output is being overdriven. Power Indicator: Blue LED indicates amplifi er has been turned on and AC power is available. Fault Indicator: Two red LEDs illuminate when amplifi er is in protect mode. Also illuminates briefl y during normal power-up when amplifi er is fi rst switched on. The recommended load impedance shall be 4 to 8 ohms per channel in Stereo, and 8 ohms in Bridge Mono. The rear-mounted output connectors shall be two 4-pole Speakon® connectors (one per channel) and a pair of binding posts per channel. Rearmounted input connectors shall be 3-pin balanced XLR connectors.

SKU 002152
Brand crown
Shipping Weight 18.0000kg
Shipping Width 0.500m
Shipping Height 0.500m
Shipping Length 0.500m
Shipping Cubic 0.125000000m3

Be The First To Review This Product!

Help other Ultra Music users shop smarter by writing reviews for products you have purchased.

Write a product review